Cell manufacturing/Separation

From KIproBatt Wiki
< Battery value chain‎ | Process‎ | Cell manufacturingBattery value chain/Process/Cell manufacturing/Separation
VisualWikitext
(updated form Separation)
Tag: 2017 source edit
Line 1: Line 1:
−
{{Semantic Element
+
{{GlossaryEntry}}{{Semantic Element
 
|label=Cell manufacturing/Separation
 
|label=Cell manufacturing/Separation
−
|description===Production process==
+
|description=
 +
===Production process===
  
−
*Separation is necessary for the production of the pouch cell and describes the separation of * anode, cathode and separator sheets from the (bought) roll material (daughter rolls).
+
*Separation is the separation of anode, cathode, and separator sheets from roll material (daughter rolls)
−
*The dried daughter rolls are unwound and fed to the separation tool.
+
*Dried daughter rolls are fed to separation machine
−
*The cutting process is usually carried out with a shear cut (punching tool) in a continuous process.
+
*Punching tool carries out shear cut in a continuous process
−
*Depending on the system concept, the individual sheets (coated on both sides) are stored in a magazine or transferred directly to the next process step.
+
*Individual sheets (coated on both sides) are transferred directly to the next process step
−
*The blank edge of the sheets are later used as the welding area for the cell tabs.
+
*Blank edge of sheets are later used as welding area for cell tabs
−
*The waste as well as the cutting dusts are extracted and transported away in the process.
 
  
−
==Process parameters & requirements==
+
===Process parameters & requirements===
  
 
*Separation time punching: approx. 0.2 s/sheet
 
*Separation time punching: approx. 0.2 s/sheet
Line 16: Line 16:
 
*Punching tool: Very good cutting edge quality (depending on wear resistance)
 
*Punching tool: Very good cutting edge quality (depending on wear resistance)
  
−
==Technology alternatives==
+
===Technology alternatives===
  
−
*Laser ablation: A guided laser beam allows the active material to be ablated again at defined points, thus exposing the carrier foil. This technology offers a high flexibility with regard to the positioning of the cell tabs.
+
*Laser ablation: Guided laser beam allows active material to be ablated again at defined points, thus exposing the carrier foil
−
*Laser cutting: Instead of a conventional punching tool, the electrodes can also be cut out by a laser.
+
*Laser cutting: Electrodes not pounched, but cut out by laser
  
−
==Quality influences==
+
===Quality influences===
  
 
*Heat-affected zone and suction of evaporated material during laser cutting
 
*Heat-affected zone and suction of evaporated material during laser cutting
Line 27: Line 27:
 
*Cutting/punching speed
 
*Cutting/punching speed
  
−
==Quality features==
+
===Quality features===
  
 
*Cutting edge geometry (e.g. smearing of the active material over the cutting edges)
 
*Cutting edge geometry (e.g. smearing of the active material over the cutting edges)
 
*Thermal and mechanical stress during the cutting process
 
*Thermal and mechanical stress during the cutting process
  
−
==Source==
+
===Source===
 
Heimes, H.H.; Kampker, A.; Lienemann, C.; Locke, M.; Offermanns, C.; Michaelis, S.; Rahimzei, E. (2018) ''Lithium-Ion Battery Cell Production Process''; PEM of RWTH Aachen and VDMA, 3rd Edition, ISBN:978-3-947920-03-7
 
Heimes, H.H.; Kampker, A.; Lienemann, C.; Locke, M.; Offermanns, C.; Michaelis, S.; Rahimzei, E. (2018) ''Lithium-Ion Battery Cell Production Process''; PEM of RWTH Aachen and VDMA, 3rd Edition, ISBN:978-3-947920-03-7
 +
 
|relations={{Semantic Link
 
|relations={{Semantic Link
 
|property=Has successor
 
|property=Has successor

Revision as of 17:01, 19 November 2021


Description

Production process

  • Separation is the separation of anode, cathode, and separator sheets from roll material (daughter rolls)
  • Dried daughter rolls are fed to separation machine
  • Punching tool carries out shear cut in a continuous process
  • Individual sheets (coated on both sides) are transferred directly to the next process step
  • Blank edge of sheets are later used as welding area for cell tabs

Process parameters & requirements

  • Separation time punching: approx. 0.2 s/sheet
  • Tolerance requirements: approx. ±200 μm width and length tolerance for the sheets
  • Punching tool: Very good cutting edge quality (depending on wear resistance)

Technology alternatives

  • Laser ablation: Guided laser beam allows active material to be ablated again at defined points, thus exposing the carrier foil
  • Laser cutting: Electrodes not pounched, but cut out by laser

Quality influences

  • Heat-affected zone and suction of evaporated material during laser cutting
  • Finishing of tools
  • Cutting/punching speed

Quality features

  • Cutting edge geometry (e.g. smearing of the active material over the cutting edges)
  • Thermal and mechanical stress during the cutting process

Source

Heimes, H.H.; Kampker, A.; Lienemann, C.; Locke, M.; Offermanns, C.; Michaelis, S.; Rahimzei, E. (2018) Lithium-Ion Battery Cell Production Process; PEM of RWTH Aachen and VDMA, 3rd Edition, ISBN:978-3-947920-03-7


Semantic Links

Add or edit outgoing links
To edit incoming links, go to the subjects site.

Outgoing

Incoming

Semantic Statements

Add statement


External Identifiers

IRI:





Retrieved from "https://kiprobatt.de/w/index.php?title=Battery_value_chain/Process/Cell_manufacturing/Separation&oldid=2763"